By following these steps, you should be able to troubleshoot and potentially address the issue of double triggering for the bass drum or other drum instruments in DWe Control.
-
Check Physical Setup:
- Ensure that the bass drum or other drum has even tension on the batter head.
- Make sure the pedal is properly mounted to the bass drum and is functioning correctly.
-
Select Instrument in DWe Control:
- Open DWe Control.
- In the left pane of DWe Control, select the instrument (e.g., bass drum) that is experiencing double triggering.
-
Adjust Sensitivity:
If the SENSITIVITY setting is set very low, slightly raise it. This adjustment might affect how the instrument responds to input and could help prevent double triggering.
-
Modify Mask Time:
Slowly increase the MASK TIME value while playing the instrument (play slowly) until the double triggering stops. The MASK TIME setting can help prevent unintended multiple triggers by ignoring quick, successive hits that might be causing the double triggering.
-
Adjust Retrigger:
Raise the RETRIGGER value slowly while striking the instrument until retriggering is no longer audible. Be cautious not to raise the RETRIGGER value too much, as a higher setting might cancel other strokes such as fast singles and doubles.