The blue LED serves as a visual indicator that an instrument has been struck. It can be seen through mesh batter heads on drums or the underside of cymbals.
By checking these points, you should be able to address the issue of the blue LED not flashing when a drum or cymbal is struck in your DWe setup.
-
Check Wireless Hub and Pairing:
Ensure that the DrumLink Wireless Hub is recognized by DWe Control. Confirm that all drum set instruments are properly paired and visible in the left pane of DWe Control. This is crucial for communication between instruments and the software.
-
Enable "LED on Hit" Option:
If the blue LED isn't flashing on a specific instrument: a. Select the instrument in DWe Control. b. Go to the OPTIONS tab for that instrument. c. Confirm that the "LED on Hit" option is checked. Enabling this option will activate the blue LED to flash when the instrument is struck.