DWe Control – Calibrating the Hi-Hat

Dialing in Your Hi-Hat: Calibrating the cymbal and pedal
Step 1: Why Optimize Your Hi-Hat
• The hi-hat is unique with various sounds and functions in drumming.
• The goal is to make it feel natural, like an acoustic hi-hat.

Step 2: Calibrating the Hi-Hat

 Highlight the hi-hat in the left panel and remove your foot from the pedal.

1. Under the "Selected Pad" window, find and click the "Calibrate Bow” button.

2. "SYNC" will flash on the hi-hat. Tap the bow of the cymbal and "SYNC" will disappear

3. Under the "Selected Pad" window, find and click the "Calibrate Pedal" button.
4. Open the hi-hat at least 2 inches (5 cm) so that it is fully open and tighten the clutch screw.
5. Click NEXT
6. Tap the hi-hat cymbal once to calibrate the open position
7. Loosen the hi-hat clutch and allow the cymbal to drop as shown and re-tighten the clutch
8. Click NEXT
9. Tap the hi-hat cymbal once to calibrate the closed position
10. The auto calibration begins, and after a few seconds will display Done!